Avigilon Client Install

Install Avigilon Client and Configure

This document will walk you through installing the Avigilon client software and adding the DMU server information for access to the DMU security / proctor cameras.

Requirements:

You need to be connected to the on-campus network or be connected through VPN
Windows computer

Install Avigilon Software

You will need to be on campus or on VPN to install.

1. Press the Windows key + R to open the Run box.

Copy and paste the following text into the box:

\\dfs-dsm\#tera7\software\Avigilon\AvigilonControlCenterClient-7.14.10.8.msi and click OK

2. Click OK and RUN on the Windows security prompts

Install Wizard will now begin

3. When prompted click Next

Installer may need to install DirectX 9.0c

4. Click Next to proceed

After DirectX 9.0c is installed the wizard will proceed with installing the Avigilon Control Center Client

5. Click Next to proceed

When installation is completed;

6. Click Finish

Avigilon Client will now open

Configure DMU Server and Log in

1. Click the Find Site… button

2. Enter the following information when prompted:

IP Address/Hostname: AVIGILONACC.dmu.edu
Base Port: 38880

3. Click OK

You will now see the Server "AvigilonACC" on the Site list.

Login

1. Click AvigilonACC from the Site list to logon

2. Enter your current DMU username and password

[username]@dmu.edu

3. Click Log In