E4117/E4119 Divisible Learning Studio is equipped with an Air Wall that can be raised or lowered. It requires two people to facilitate this operation.

Air Wall Operation

1. Locate the Air Wall controllers on either side of the partition.

2. Touch either one of the controllers to wake it up. When prompted, type in the code 8025 and select the checkmark.

3. On both controllers, touch "Agree" to agree to the safe operation statement.

4. After verifying both sides of the wall is clear of both people and furniture, simultaneously press and hold the up or down arrow

    on one of the controllers and the round hold button on the other controller. 

5. If you need to stop the Air Wall for any reason while it is moving, either person can remove their finger from the controls. When the 

    wall is fully up or in the down position, both people can release.

AV System Operation

The AV system defaults to divided mode on startup. To switch to combined mode:

1. Touch "Partition" from the left side menu in either Zoom Mode or Flex Mode.

2. Then touch "Combined", followed by "Start". 

When spaces are combined, the room audio and video will also be combined, and the AV controller in E4117 will control both spaces.

And when in divided mode, each room's AV controller will operate independently.