Athenahealth
KBs relating to Athenahealth EHR and its peripherals.
-
AmbirScan - Install/Setup
This article will walk you through install the AmbirScan drivers and software for the current Ambirscan model: DS687. Install the Drivers and Software files located here: Drivers: \\tera7\Software\Athena Drivers\AmbirScan\AmbirScanTWAIN_2.0.0B2.exe Software: \\tera7\Software\Athena Drivers\AmbirScan\AmbirScanForAthena_V3_8_1.exe Reboot your computer when completed. Configure the Athena Card settings: There is a scan profile on the main menu called Athena Card. Selecting this will automatically use the presets saved within that profile. You may need to make adjustments to the Athena Card profile if this is a new install or a new user. To make those adjustments; follow the steps below: 1. Open the AmbirScan software 2. Select the Quick Settings menu 3. Select the Athena Card profile (left side) 4. You will see 3 tabs below the menu bar called Scanning, Output, and Imaging. Match each of the settings on those screens to the screen shots below. 5. When done, click Save Changes.
-
Check/Install Athena Devices
This will walk you through checking the status and/or installing peripherals to work with Athena. Dymo Label Printer Ingenico Credit Card Reader and others. 1. Login to Athena 2. Click the Gear icon and Device Management 3. Ensure the ADM is running. You should see a green circle with a checkmark. If the ADM is not running: Open the Start menu and type Athena Device Manager Click the icon to start the program. 4. Click the INSTALL button on each device you use You will receive a prompt that installation is successful The status should say “Connected”